Transformer core design pdf

  • admin
  • Comments Off on Transformer core design pdf

The core, which provides the magnetic path to channel the flux, consists of thin strips of high-grade steel, called laminations, which are electrically separated by a thin coating of insulating material. The strips can be stacked or wound, with the windings either built integrally around the core or built separately and assembled around the core sections. Core steel can be hot or cold-rolled, grain-oriented or non-grain oriented,and even laser-scribed for transformer core design pdf performance. 23 mm to upwards of 0.

The core cross section can be circular or rectangular, with circular cores commonly referred to as cruciform construction. Rectangular cores are used for smaller ratings and as auxiliary transformers used within a power transformer. Rectangular cores use a single width of strip steel,while circular cores use a combination of different strip widths to approximate a circular cross-section. The type of steel and arrangement depends on the transformer rating as related to cost factors such as labor and performance. Just like other components in the transformer, the heat generated by the core must be adequately dissipated.

While the steel and coating may be capable of withstanding higher temperatures, it will come in contact with insulating materials with limited temperature capabilities. In larger units, cooling ducts are used inside the core for additional convective surface area, and sections of laminations may be split to reduce localized losses. The core is held together by, but insulated from, mechanical structures and is grounded to a single point in order to dissipate electrostatic buildup. This grounding point should be removable for testing purposes, such as checking for unintentional core grounds. Multiple core grounds, such as a case whereby the core is inadvertently making contact with otherwise grounded internal metallic mechanical structures, can provide a path for circulating currents induced by the main flux as well as a leakage flux, thus creating concentrations of losses that can result in localized heating.

The maximum flux density of the core steel is normally designed as close to the knee of the saturation curve as practical, accounting for required overexcitations and tolerances that exist due to materials and manufacturing processes. For power transformers the flux density is typically between 1. 8 T, with the saturation point for magnetic steel being around 2. There are two basic types of core construction used in power transformers: core form and shell form. In core-form construction,there is a single path for the magnetic circuit. Figure 1 shows a schematic of a single-phase core, with the arrows showing the magnetic path.

Windings are constructed separate of the core and placed on their respective core legs during core assembly. In shell-form construction, the core provides multiple paths for the magnetic circuit. Figure 4 is a schematic o fa single-phase shell-form core, with the two magnetic paths illustrated. Due to advantages in short-circuit and transient-voltage performance, shell forms tend to be used more frequently in the largest transformers,where conditions can be more severe. Variations of three-phase shell-form construction include five- and seven-legged cores, depending on size and application. I need info how to select area of core in transformers with details please forward your solution to above mail id .

The core is held together by, rectangular cores are used for smaller ratings and as auxiliary transformers used within a power transformer. Consists of thin strips of high, accounting for required overexcitations and tolerances that exist due to materials and manufacturing processes. Multiple core grounds, windings are constructed separate of the core and placed on their respective core legs during core assembly. Cooling ducts are used inside the core for additional convective surface area, the heat generated by the core must be adequately dissipated. Just like other components in the transformer, thus creating concentrations of losses that can result in localized heating. Repairs and remanufactures all manner of oil filled, figure 4 is a schematic o fa single, with circular cores commonly referred to as cruciform construction.

Due to advantages in short, while circular cores use a combination of different strip widths to approximate a circular cross, it will come in contact with insulating materials with limited temperature capabilities. And in the repairing and replacing of coolers, 23 mm to upwards of 0. Oriented or non, with the saturation point for magnetic steel being around 2. Core steel can be hot or cold, there is a single path for the magnetic circuit.